Electronic Vis-U-Tec |
The Electronic Vis-U-Tec senses pressure differentials as low as 10 psig (0.69 barg) downstream from the Rupture Disk (Bursting Disc). Vis-U-Tec's piston fully extends, breaking the sensor's conductive circuit. Used with the Burst Disk Monitor, Vis-U-Tec's electrical warning triggers an audible or visual alarm.
Benefits
- Instantly Warns of a Ruptured Disk
- Reduces Plant Down-Time
- Reduces Product Loss
- Minimizes Environmental Pollution
- Re-useable - Reset the Piston Position
Applications
- Relief Valve Isolation
- For Double Disk Assemblies, Mid-Flange Installation Between Disks
- For Disks Free-Venting to Atmosphere or Down-Stream Piping
- Storage and Process Vessel Pressure Detection
Features
- After replacing the ruptured disk, reset the Vis-U-Tec by pushing the piston fully back into the unit.
- 12 inch (30cm) two-conductor cable
- 316 SS construction for all wetted parts contacting process fluids
- Viton O-ring seals the piston.
- Operating temperatures range from - 40 °F (- 40 °C) to 400 °F (204 °C).
- Maximum current: 250 mA
- Maximum voltage: 24 Vdc
- Suitable for intrinsically safe applications when used with certified apparatus (i.e. Zener Barrier)
- Available with Aluminum Piston option that provides visual warning only.
Installation
The Vis-U-Tec sensor fits into the Safety Head or piping outlet using a _ inch NPT screw connection.
Availability
Use the Vis-U-Tec sensor in applications that vent into enclosed volumes or for free-venting applications.
Consult the following table for minimum burst pressures.
APPLICATIONS VENTING INTO ENCLOSED VOLUMES | |||
Activation Pressure | 10 psig (0.69 barg) | ||
Minimum Disk Burst Pressure | 40 psig (2.76 barg) |
FREE VENTING DISK APPLICATIONS | |||
Disk Size | Minimum Burst Pressure* | ||
Inches | mm | psig | barg |
1 | 25 | 100 | 6.89 |
1.5 | 40 | 100 | 6.89 |
2 | 50 | 100 | 6.89 |
3 | 80 | 200 | 13.79 |
4 | 100 | 200 | 13.79 |
6 | 150 | 350 | 24.13 |
Ordering Information
For all your rupture disk (bursting disc) needs, rely on BS&B. Contact the representative in your area or contact BS&B Safety Systems today.